The Duebre Spider-Jet is cutting through roots, concrete, grease, mineral deposits, and can remove protruding laterals.
Turbine driven: The low-torque high-speed design requires little flow of water and pressure to generated the power to remove most any obstruction. Only a small jetter is required, but of course most any combination truck can run it.
German engineered, it is heavy duty and nearly maintenance free. With very little to maintain it will still last decades. The bearings are life time lubricated and cooled by the water running thought the system. The rotating speed does vary depending on the chain used, size of pipe and flow and pressure applied. Speeds well above 10,000 rpm are normal with flow rates as little from 50 to 600 lpm (10 to 160 gpm) at varied pressures.
The centralizer is freely adjustable to any dimension between 200 mm (8") to 400 mm (15.7") with four screws in seconds.
All models clean with filled link chains. Special knife adapters to cut through obstructions are available.
|Hook up BSP||1"|
|Weight kg (lb)||18.3 (40.3)|
|Ø x L mm (Inch)||200 to 400 x 567 ( 10 -16 )|
|Pipe Diameter mm (Inch)||200 - 400 (8 - 16)|
|Minimum flow required in lpm at 100 bar (gpm at 1450 psi)||70 (18)|
SPJ100 Spider Jet
- Brand: Duebre
- Product Code: 3000-0200
- Availability: In Stock